MP2703 Linear Chargers for 1 & 2 Cell Batteries

Monolithic Power Systems (MPS) MP2703 Linear Chargers are for 1- and 2-cell Li-ion, Li-polymer, LiFePO4, and 2- to 6-cell NiMH batteries. The MP2703 chargers can sustain a voltage of up to 26V. MPS MP2703 measures the battery voltage (VBATT) and automatically charges the battery in four phases: trickle charge, pre-charge, constant-current (CC) fast charge, and constant-voltage charge. A dedicated ISET pin sets the charge current by connecting a resistor between the ISET and the ground. A minimum input voltage limit (VIN_LIM) reduces the charge current when the input power is overloaded. The MP2703 provides robust protections, including input over-voltage protection (OVP), battery OVP, charge safety timer, and battery temperature protection (compliant with the JEITA standard).

Ergebnisse: 2
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt
Batterietyp
Ausgangsstrom
Verpackung/Gehäuse
Montageart
Serie
Verpackung
Monolithic Power Systems (MPS) Batterie-Management 26V Input, 1A Linear Charger with Battery Diagnostic for 1 or 2 Cell
Datenblatt
9 876Auf Lager
Cut-Tape
0.595 CHF
0.423 CHF
0.38 CHF
0.332 CHF
Anzeigen
Reel
0.279 CHF
Min.: 1
Mult.: 1
: 5 000
Charge Management Lithium Iron Phosphate (LiFePO4), Lithium-ion, Lithium Polymer, Nickel Metal Hydride (NiMH) 1 A QFN-10 SMD/SMT MP2703 Reel, Cut Tape
Monolithic Power Systems (MPS) Batterie-Management 26V Input, 1A Linear Charger with Battery Diagnostic for 1 or 2 Cell
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 71 Wochen
Cut-Tape
0.964 CHF
0.694 CHF
0.626 CHF
0.551 CHF
0.53 CHF
Reel
0.53 CHF
Min.: 1
Mult.: 1
: 500
Charge Management Lithium Iron Phosphate (LiFePO4), Lithium-ion, Lithium Polymer, Nickel Metal Hydride (NiMH) 1 A QFN-10 SMD/SMT MP2703 Reel, Cut Tape