SparkFun Hardware

Ergebnisse: 6
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
SparkFun Abstandsbolzen & Abstandshalter One of the things we always seem to need is standoffs. This 210-piece brass standoff kit ensures you'll always have a set handy. Covering two of the most popular screw sizes used with PCBs and different standoff heights it's a perfect addition to yo 70Auf Lager
16.33 CHF
Min.: 1
Mult.: 1
SparkFun Abstandsbolzen & Abstandshalter These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold individually. Nicht auf Lager
1.57 CHF
Min.: 1
Mult.: 1
SparkFun Abstandsbolzen & Abstandshalter These aluminum hex standoffs are 4.5mm across the flats. 16.0mm long and tapped through for a M2.5-0.45 screw. These are great for mounting pHATs to Raspberry Pi boards.Sold individually. Nicht auf Lager
0.628 CHF
Min.: 1
Mult.: 1
SparkFun Abstandsbolzen & Abstandshalter Protect your Alchitry board by adding these stylish standoffs!The bolts protrude about 2mm below the board which is just further than the lowest part on the bottom of the Au Cu or Pt. Nicht auf Lager
2.88 CHF
Min.: 1
Mult.: 1
Nein
SparkFun Schrauben & Befestigungsvorrichtungen These are Philips-head M2.5-0.45 screws. The thread is 8.0mm long. They are steel with a zinc coating to DIN7985A. Ideal for Raspberry Pi pHAT standoffs.Sold individually. Nicht auf Lager
0.125 CHF
Min.: 1
Mult.: 1
Nein
SparkFun Sensor-Kleinteile u. Zubehör This Wind Sensor Mounting Arm identical to the one included in our Weather Meter Kit provides a stable and reliable platform for securing your anemometer and wind vane. Designed for easy installation on a metal mast or pole it ensures your wind s Nicht auf Lager
4.98 CHF
Min.: 1
Mult.: 1
Nein