|
|
Sensor-Kleinteile u. Zubehör WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
- SAB-497AB1DS6-Q5E
- Banner Engineering
-
1:
601.03 CHF
-
2Auf Lager
|
Mouser-Teilenr.
778-SAB-497AB1DS6Q5E
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
- BRT-THG-3-600
- Banner Engineering
-
1:
657.32 CHF
-
4Auf Lager
|
Mouser-Teilenr.
778-BRT-THG-3-600
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
- SOP-E12-900A
- Banner Engineering
-
1:
38.85 CHF
-
32Auf Lager
|
Mouser-Teilenr.
778-SOP-E12-900A
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
|
|
32Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör L1 A3 FULLY ASSY MULTIBEAM
- L1A3
- Banner Engineering
-
1:
620.06 CHF
-
2Auf Lager
|
Mouser-Teilenr.
778-L1A3
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör L1 A3 FULLY ASSY MULTIBEAM
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBC1
- Banner Engineering
-
1:
338.72 CHF
-
4Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBC1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: EZ SCREEN Accessory Center Bracket Support
- EZA-MBK-12-CB
- Banner Engineering
-
1:
144.31 CHF
-
3Auf Lager
|
Mouser-Teilenr.
778-EZA-MBK-12-CB
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: EZ SCREEN Accessory Center Bracket Support
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
- LMB22LP
- Banner Engineering
-
1:
11.89 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-LMB22LP
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
- SMBPVD100AB
- Banner Engineering
-
1:
36.14 CHF
-
4Auf Lager
|
Mouser-Teilenr.
778-SMBPVD100AB
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör R90 Right-Angle Magnetic Mount; M4 x 0.7 mm; Stainless Steel
- SMBR90RAMAG
- Banner Engineering
-
1:
32.51 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBR90RAMAG
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör R90 Right-Angle Magnetic Mount; M4 x 0.7 mm; Stainless Steel
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: Two Replacement Brackets hardware included; 316 Stainless Steel; Used with WLS28 models
- SMBWLS28RAS
- Banner Engineering
-
1:
21.64 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBWLS28RAS
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: Two Replacement Brackets hardware included; 316 Stainless Steel; Used with WLS28 models
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schalterkleinteile Hinge - Blank: SI-HG80 Family; Die-Cast Zinc
- SI-HG80A
- Banner Engineering
-
1:
45.34 CHF
-
43Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SI-HG80A
|
Banner Engineering
|
Schalterkleinteile Hinge - Blank: SI-HG80 Family; Die-Cast Zinc
|
|
43Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: for DX80 or Q45 to K50U-RA
- BWA-BK-004
- Banner Engineering
-
1:
33.30 CHF
-
9Auf Lager
|
Mouser-Teilenr.
778-BWA-BK-004
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: for DX80 or Q45 to K50U-RA
|
|
9Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: EG24 Reflector Arm with Reflector
- ACC-EG24-REFLECTOR ARM
- Banner Engineering
-
1:
20.62 CHF
-
1Auf Lager
-
Neu bei Mouser
|
Mouser-Teilenr.
778-EG24REFLECTORARM
Neu bei Mouser
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: EG24 Reflector Arm with Reflector
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schalterkleinteile iVu Window spare parts kit; includes window, locking clip, screw; and O-ring
- IVUW
- Banner Engineering
-
1:
19.03 CHF
-
4Auf Lager
|
Mouser-Teilenr.
778-IVUW
|
Banner Engineering
|
Schalterkleinteile iVu Window spare parts kit; includes window, locking clip, screw; and O-ring
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
- LMBHLS27S
- Banner Engineering
-
1:
15.86 CHF
-
2Auf Lager
|
Mouser-Teilenr.
778-LMBHLS27S
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For Use with WLB92; Hanging Kit; 1.5 m (5 ft) Cable with Looped End; Galvanized Steel; Packaged Two per Kit (Hardware Included)
- LMBWLB92HK5
- Banner Engineering
-
1:
41.23 CHF
-
5Auf Lager
|
Mouser-Teilenr.
778-LMBWLB92HK5
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For Use with WLB92; Hanging Kit; 1.5 m (5 ft) Cable with Looped End; Galvanized Steel; Packaged Two per Kit (Hardware Included)
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For Use with WLC60; Back Plate for 340 mm Model; 300 Series Stainless Steel (Hardware Included)
- LMBWLC60B340
- Banner Engineering
-
1:
45.99 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-LMBWLC60B340
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For Use with WLC60; Back Plate for 340 mm Model; 300 Series Stainless Steel (Hardware Included)
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For Use with WLS28; 180 Degree Rotation; Set of Two Snap Brackets; 300 Series Stainless Steel
- LMBWLS28-180S
- Banner Engineering
-
1:
26.96 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-LMBWLS28-180S
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For Use with WLS28; 180 Degree Rotation; Set of Two Snap Brackets; 300 Series Stainless Steel
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
- MSA-S42-1
- Banner Engineering
-
1:
586.24 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-MSA-S42-1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
- OTC-1-GN
- Banner Engineering
-
1:
17.44 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-OTC-1-GN
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc-12-250 V ac; Output: SPDT Electromechanical Relay; Wiring Chamber
- RPBR2
- Banner Engineering
-
1:
151.45 CHF
-
3Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-RPBR2
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc-12-250 V ac; Output: SPDT Electromechanical Relay; Wiring Chamber
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBEV
- Banner Engineering
-
1:
225.22 CHF
-
5Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBEV
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
- SMBPVA7
- Banner Engineering
-
1:
39.65 CHF
-
5Auf Lager
|
Mouser-Teilenr.
778-SMBPVA7
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
- SMBSAB-IN
- Banner Engineering
-
1:
11.10 CHF
-
6Auf Lager
|
Mouser-Teilenr.
778-SMBSAB-IN
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Montagekleinteile Accessory: Montagekleinteile - 13/16 Unistrut Channel
- SMH1316
- Banner Engineering
-
1:
13.48 CHF
-
5Auf Lager
|
Mouser-Teilenr.
778-SMH1316
|
Banner Engineering
|
Montagekleinteile Accessory: Montagekleinteile - 13/16 Unistrut Channel
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Schweiz
