Alle Ergebnisse (377)

Auswählen Bild Teile-Nr. Herst. Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern. Menge RoHS
Marki Microwave Signalaufbereitung This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity. 3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond. 6Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 3Auf Lager
3erwartet ab 03.11.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The PBR-0006 is a 300 kHz to 6 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 40 dB typical isolation across the operational bandwidth. 3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band. 3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications. 1Auf Lager
4erwartet ab 01.01.2027
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth. 3Auf Lager
5erwartet ab 09.12.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BT2-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 2Auf Lager
4Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz. 1Auf Lager
2erwartet ab 05.11.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN2-0026 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-1044H is a GaAs MMIC double balanced mixer that is designed for and operates at the K and Ka band 5G frequencies. MM1-1044H is a high linearity Ka band mixer that works well as both an up and down converter. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry. 1Auf Lager
1erwartet ab 25.09.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm. 3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency. 3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 5Auf Lager
Min.: 1
Mult.: 1