|
|
Sensor-Kleinteile u. Zubehör WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
- SAB-497AB1DS6-Q5E
- Banner Engineering
-
1:
591.52 CHF
-
2Auf Lager
|
Mouser-Teilenr.
778-SAB-497AB1DS6Q5E
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Laser Alignment Tool: Class 2 Laser; Visible Red; Mounting Clips Included for EZ-SCREEN 14/30, LS, LP, Type 2; SGS and S4B
- LAT-1
- Banner Engineering
-
1:
455.14 CHF
-
8Auf Lager
|
Mouser-Teilenr.
778-LAT-1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Laser Alignment Tool: Class 2 Laser; Visible Red; Mounting Clips Included for EZ-SCREEN 14/30, LS, LP, Type 2; SGS and S4B
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Laser Alignment Tool
|
Class 2 Laser
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBC1
- Banner Engineering
-
1:
323.54 CHF
-
4Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBC1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör L1 A3 FULLY ASSY MULTIBEAM
- L1A3
- Banner Engineering
-
1:
601.83 CHF
-
2Auf Lager
|
Mouser-Teilenr.
778-L1A3
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör L1 A3 FULLY ASSY MULTIBEAM
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
- BRT-THG-3-600
- Banner Engineering
-
1:
657.33 CHF
-
4Auf Lager
|
Mouser-Teilenr.
778-BRT-THG-3-600
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Retroreflective Tape
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Retro; Range: 2.5cm-22 m; Input: depends on power block; Output: depends on the power block; Interconnecting Pins
- SBL1
- Banner Engineering
-
1:
249.77 CHF
-
12Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBL1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Retro; Range: 2.5cm-22 m; Input: depends on power block; Output: depends on the power block; Interconnecting Pins
|
|
12Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör SBRXLJ1 SCAN. BLK. MULTIBEAM
Banner Engineering SBRXLJ1
- SBRXLJ1
- Banner Engineering
-
1:
308.45 CHF
-
4Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBRXLJ1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör SBRXLJ1 SCAN. BLK. MULTIBEAM
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Opposed Mode Scanner Block
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: for DX80 or Q45 to K50U-RA
- BWA-BK-004
- Banner Engineering
-
1:
32.51 CHF
-
6Auf Lager
|
Mouser-Teilenr.
778-BWA-BK-004
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: for DX80 or Q45 to K50U-RA
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: EG24 Reflector Arm with Reflector
- ACC-EG24-REFLECTOR ARM
- Banner Engineering
-
1:
19.82 CHF
-
1Auf Lager
-
Neu bei Mouser
|
Mouser-Teilenr.
778-EG24REFLECTORARM
Neu bei Mouser
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: EG24 Reflector Arm with Reflector
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Reflector Arm with Reflector
|
EG24 Series
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
- LMBHLS27S
- Banner Engineering
-
1:
15.07 CHF
-
2Auf Lager
|
Mouser-Teilenr.
778-LMBHLS27S
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
- MSA-S42-1
- Banner Engineering
-
1:
569.32 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-MSA-S42-1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Stands
|
optical Safety System Sensors or Corner Mirrors
|
|
|
|
Sensor-Kleinteile u. Zubehör OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
- OTC-1-GN
- Banner Engineering
-
1:
16.65 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-OTC-1-GN
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
- SMBPVA7
- Banner Engineering
-
1:
38.85 CHF
-
5Auf Lager
|
Mouser-Teilenr.
778-SMBPVA7
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
- SMBSAB-IN
- Banner Engineering
-
1:
10.31 CHF
-
9Auf Lager
|
Mouser-Teilenr.
778-SMBSAB-IN
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
|
|
9Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör RS-232 Communication Interface Accessory; Support Bannerbus from Sensor Pin 4; 150 mm (6 in) M12 PVC Pigtail QD
- INT-BBB-X232Q5
- Banner Engineering
-
1:
275.14 CHF
-
3Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-INT-BBB-X232Q5
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör RS-232 Communication Interface Accessory; Support Bannerbus from Sensor Pin 4; 150 mm (6 in) M12 PVC Pigtail QD
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: L; Material: 14 Gauge 316 Stainless Steel
- SMB46L2
- Banner Engineering
-
1:
16.65 CHF
-
4Auf Lager
|
Mouser-Teilenr.
778-SMB46L2
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: L; Material: 14 Gauge 316 Stainless Steel
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: Protective bracket; +/- 22.5 deg swivel; Stainless Steel; Used with Q20
- SMBQ20U
- Banner Engineering
-
1:
11.89 CHF
-
6Auf Lager
|
Mouser-Teilenr.
778-SMBQ20U
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: Protective bracket; +/- 22.5 deg swivel; Stainless Steel; Used with Q20
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Brackets
|
WORLD-BEAM Q20 Sensor with Background Suppression
|
|
|
|
Sensor-Kleinteile u. Zubehör SMBQ50 MOUNTING BRACKET
- SMBQ50
- Banner Engineering
-
1:
27.75 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBQ50
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör SMBQ50 MOUNTING BRACKET
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: Tank Level, Horizontal Mounting; Material: 12 Gauge Stainless Steel; T mounting slots for versatility/orientation; Clearance for M6 (1/4 in) hardware
- SMBT30RTM
- Banner Engineering
-
1:
29.34 CHF
-
3Auf Lager
|
Mouser-Teilenr.
778-SMBT30RTM
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: Tank Level, Horizontal Mounting; Material: 12 Gauge Stainless Steel; T mounting slots for versatility/orientation; Clearance for M6 (1/4 in) hardware
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 33 x 13 mm; Reflectivity Factor: 1.3; Max Temp = 60 degree C; Plastic - M3 threaded holes 25.2 mm
- BRT-33x13ABCM3
- Banner Engineering
-
1:
15.07 CHF
-
6Auf Lager
|
Mouser-Teilenr.
778-BRT-33X13ABCM3
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 33 x 13 mm; Reflectivity Factor: 1.3; Max Temp = 60 degree C; Plastic - M3 threaded holes 25.2 mm
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Reflector
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
- LMB22LP
- Banner Engineering
-
1:
11.10 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-LMB22LP
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
- SMBPVD100AB
- Banner Engineering
-
1:
34.89 CHF
-
4Auf Lager
|
Mouser-Teilenr.
778-SMBPVD100AB
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör R90 Right-Angle Magnetic Mount; M4 x 0.7 mm; Stainless Steel
- SMBR90RAMAG
- Banner Engineering
-
1:
31.72 CHF
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBR90RAMAG
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör R90 Right-Angle Magnetic Mount; M4 x 0.7 mm; Stainless Steel
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Glass Lens: Aluminum Housing; Accepts M8 X 1.25 Thread. Long Range or Retroreflective Sensing
- L9M8
- Banner Engineering
-
1:
38.06 CHF
-
5Auf Lager
|
Mouser-Teilenr.
778-L9M8
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Glass Lens: Aluminum Housing; Accepts M8 X 1.25 Thread. Long Range or Retroreflective Sensing
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing Clamp; Set of Two Brackets; 300 Series Stainless Steel; M5 Stainless Steel Hardware Included for Securing Bracket to LED light
- LMBHLS27O
- Banner Engineering
-
1:
15.07 CHF
-
3Auf Lager
|
Mouser-Teilenr.
778-LMBHLS27O
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing Clamp; Set of Two Brackets; 300 Series Stainless Steel; M5 Stainless Steel Hardware Included for Securing Bracket to LED light
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
Schweiz