Marki Microwave Signalaufbereitung

Ergebnisse: 568
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt-Typ
Produkt
Frequenz
Frequenzbereich
Nennspannung
Scheinwiderstand (Impedanz)
Montage
Minimale Betriebstemperatur
Maximale Betriebstemperatur
Marki Microwave Signalaufbereitung The MPDW-10110M2 is a mmWave 2-way Wilkinson power divider featuring high isolation in our connectorized miniature M2-package enabling operation up to 110 GHz. The MPDW-10110M2 is available as a 1.0mm connectorized module.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MQS-0209 is a MMIC 2GHz - 9GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MQS-0218SM is a MMIC 2GHz - 18GHz 90 splitter/combiner. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MQS-0218SM is available as a 4 x 4 mm QFN package.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Signalaufbereitung The MQS-0218 is a MMIC 2GHz - 18GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung MQS-0418 is a MMIC 4GHz - 18GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MQS-0518SM is a MMIC 5 GHz - 18 GHz 90 splitter/combiner. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MQS-0518SM is available as 4X4 mm QFN Package.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Signalaufbereitung The MT3A-0113H is a versatile, robust, and broadband Two-Tone-Terminator mixer integrated with a low phase noise LO driver amplifier.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MT3H-0113H is a triple balanced passive diode mixer offering high dynamic range, low conversion loss, and excellent repeatability.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MT3H-0113L is a triple balanced passive diode mixer offering high dynamic range, low conversion loss, and excellent repeatability.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung MT3L-0113H is a GaAs MMIC triple balanced mixer with high dynamic range and low conversion loss. This mixer belongs to the T3 family which offers high IP3, P1dB, and broad operating bandwidths for applications in the S, C and X bands.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6273 is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a low 0.7 to 5 GHz input frequency range with output tones beyond 40 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6273SM is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a low 0.7 to 5 GHz input frequency range with output tones to 24 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6275 is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a 3 to 15 GHz input frequency range with output tones beyond 85 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6275 is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a 3 to 15 GHz input frequency range with output tones beyond 85 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6794SM is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a low 100MHz to 1 GHz input frequency range with output tones beyond 30 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6796SM is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a 500MHz to 3.5 GHz input frequency range with output tones beyond 40 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Signalaufbereitung The PBR-0003SMG is a 10 MHz to 3 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 40 dB typical isolation across the operational bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 10
Mult.: 10

Signal Conditioning
Marki Microwave Signalaufbereitung The PBR-0012 is a 300 kHz to 12 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 35 dB typical isolation across the operational bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The PBR-0012SMG is a 10 MHz to 12 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 30 dB typical isolation across the operational bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 10
Mult.: 10

Signal Conditioning
Marki Microwave Signalaufbereitung A resistive 2-way power divider that features broadband operation from DC to 10 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Signalaufbereitung Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 5
Mult.: 5
Signal Conditioning
Marki Microwave Signalaufbereitung A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 5
Mult.: 5
Signal Conditioning
Marki Microwave Signalaufbereitung A surface mount resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 10
Mult.: 10
Signal Conditioning