Wählen Sie eine Kategorie unten, um die Filteroptionen zu sehen und Ihre Suche einzugrenzen.

Werkzeuge u. Verbrauchsmaterialien
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Embedded Lösungen
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Industrielle Automation
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Passive Bauteile

Sensoren
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Draht u. Kabel
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Steckverbinder
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Optoelektronik
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Elektromechanik
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Halbleiter
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Gehäuse

Leistung

Prüfen & Messen
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Kühlung

Nicht klassifiziert

 Mehr zeigen 
Ergebnisse: 1 704
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
SparkFun SparkFun Zubehör This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
Datenblatt
170Auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p
Datenblatt
42Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 2Auf Lager
5erwartet ab 06.08.2026
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 15Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector center positive. This cable allows the user to use a USB port on a computer laptop or on our cigarette power supply to provide our development boards with 5V.The US 10Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi 22Auf Lager
Min.: 1
Mult.: 1
SparkFun Klemmen Quick Disconnects- Female 1/4 Pk of 5 348Auf Lager
Min.: 1
Mult.: 1

SparkFun Entwicklungstools für optische Sensoren A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
Datenblatt
429Auf Lager
Min.: 1
Mult.: 1

SparkFun Raspberry Pi Hats / Add-on-Boards Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre 84Auf Lager
Min.: 1
Mult.: 1
SparkFun DC-Lüfter The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled 5Auf Lager
Min.: 1
Mult.: 1
SparkFun NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
Datenblatt
21Auf Lager
Min.: 1
Mult.: 1
SparkFun Magnetische / Reed-Schalter This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens. 8Auf Lager
Min.: 1
Mult.: 1
SparkFun Multiprotokoll-Module The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
Datenblatt
4Auf Lager
2erwartet ab 10.06.2026
Min.: 1
Mult.: 1

SparkFun Kraftsensoren und Kraftaufnehmer This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower 10Auf Lager
Min.: 1
Mult.: 1

SparkFun Gehäuse für Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe 8Auf Lager
Min.: 1
Mult.: 1
SparkFun Robotik-Kits für Bildungszwecke Do you have some liquids that you need to move? This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V 1.5Amp motor and a tough thermoplastic body. It's totally submersible and water-cooled (but it won't burn 1Auf Lager
Min.: 1
Mult.: 1
SparkFun Antennenentwicklungstools This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro 6Auf Lager
Min.: 1
Mult.: 1
SparkFun SIM-Karten The Hologram eUICC SIM Card is a mix between legacy and new technology when cellular service is needed your project. This eUICC SIM Card enables profile switching capabilities so you can dynamically change the subscriber profile while your chosen dev
Datenblatt
37Auf Lager
85erwartet ab 10.07.2026
Min.: 1
Mult.: 1
SparkFun NFC/RFID Development Tools RFID Tag (125kHz) 95Auf Lager
Min.: 1
Mult.: 1

SparkFun Gehäuse für Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas 5Auf Lager
Min.: 1
Mult.: 1
SparkFun Multiprotokoll-Module The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
Datenblatt
15Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
Datenblatt
261Auf Lager
Min.: 1
Mult.: 1
Nein
SparkFun Kameralinsen This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module. The lens produces a 3MP picture in a 0.5in image format and is easily interchangeable using the thumb screw and adapter included wi 2Auf Lager
Min.: 1
Mult.: 1
Nein
SparkFun SparkFun Zubehör It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch. The hot red safety cover protects a toggle switc 41Auf Lager
Min.: 1
Mult.: 1
Nein
SparkFun SparkFun Zubehör This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" ( 150mm) cable has been terminated with a JST-PH connector.The connector mates the JST socket on the micro:bit perfectly allowing you to easily make your p 17Auf Lager
Min.: 1
Mult.: 1