|
|
SparkFun Zubehör A solid state relay (SSR) allows you to control high-curent AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays. One such advantage is that they can be switched by a much lower voltage a
- COM-13015
- SparkFun
-
1:
11.55 CHF
-
112Auf Lager
|
Mouser-Teilenr.
474-COM-13015
|
SparkFun
|
SparkFun Zubehör A solid state relay (SSR) allows you to control high-curent AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays. One such advantage is that they can be switched by a much lower voltage a
|
|
112Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schnittstellen-Entwicklungstools USB to RS-485 Converter
- BOB-09822
- SparkFun
-
Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
474-BOB-09822
|
SparkFun
|
Schnittstellen-Entwicklungstools USB to RS-485 Converter
|
|
|
|
|
|
|
|
|
Zigbee-Module – 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15127
- SparkFun
-
1:
31.91 CHF
-
83Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
474-WRL-15127
|
SparkFun
|
Zigbee-Module – 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
|
|
83Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Entwicklungsboards und Kits - ARM The micro:bit Educator's Lab Pack includes 10 micro:bit boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need including micro:bits cables battery packs and a few parts to experiment
- LAB-17361
- SparkFun
-
1:
330.84 CHF
-
5Auf Lager
|
Mouser-Teilenr.
474-LAB-17361
|
SparkFun
|
Entwicklungsboards und Kits - ARM The micro:bit Educator's Lab Pack includes 10 micro:bit boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need including micro:bits cables battery packs and a few parts to experiment
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Entwicklungstools für Temperatur-Sensoren Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body
- SEN-09570
- SparkFun
-
1:
16.49 CHF
-
97Auf Lager
|
Mouser-Teilenr.
474-SEN-09570
|
SparkFun
|
Entwicklungstools für Temperatur-Sensoren Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body
|
|
97Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Entwicklungsboards und Kits - ARM The micro:bit v2 Club Kit is the perfect starting point for STEM clubs coding camps and classrooms. This kit contains ten complete micro:bit v2 Go Bundles providing everything a group needs to get hooked up powered and programming in seconds. I
- KIT-17290
- SparkFun
-
1:
205.13 CHF
-
7Auf Lager
|
Mouser-Teilenr.
474-KIT-17290
|
SparkFun
|
Entwicklungsboards und Kits - ARM The micro:bit v2 Club Kit is the perfect starting point for STEM clubs coding camps and classrooms. This kit contains ten complete micro:bit v2 Go Bundles providing everything a group needs to get hooked up powered and programming in seconds. I
|
|
7Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Luftqualitätssensoren This is a simple-to-use liquefied petroleum gas (LPG) sensor suitable for measuring LPG (primarily propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations from 200 to 10000 ppm.This sensor has a high sensitivity and fa
- SEN-09405
- SparkFun
-
1:
5.72 CHF
-
322Auf Lager
|
Mouser-Teilenr.
474-SEN-09405
|
SparkFun
|
Luftqualitätssensoren This is a simple-to-use liquefied petroleum gas (LPG) sensor suitable for measuring LPG (primarily propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations from 200 to 10000 ppm.This sensor has a high sensitivity and fa
|
|
322Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Entwicklungsboards und Kits - ARM The SparkFun Inventor's Kit for micro:bit v2 Lab Pack includes 10 complete micro:bit v2 Inventor's Kits an SIK Refill Pack and 25 AAA-sized batteries to get your students started in the world of electronics. The SIKs inside the Lab Pack have everyth
- LAB-17363
- SparkFun
-
1:
474.17 CHF
-
4Auf Lager
|
Mouser-Teilenr.
474-LAB-17363
|
SparkFun
|
Entwicklungsboards und Kits - ARM The SparkFun Inventor's Kit for micro:bit v2 Lab Pack includes 10 complete micro:bit v2 Inventor's Kits an SIK Refill Pack and 25 AAA-sized batteries to get your students started in the world of electronics. The SIKs inside the Lab Pack have everyth
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Tastaturen Keypad - 12 Button
- COM-14662
- SparkFun
-
1:
4.08 CHF
-
486Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
474-COM-14662
|
SparkFun
|
Tastaturen Keypad - 12 Button
|
|
486Auf Lager
|
|
Min.: 1
Mult.: 1
|
Nein
|
|
|
|
Raspberry Pi Zubehör Raspberry Pi GPIO Male Header - 2x20
- PRT-14275
- SparkFun
-
1:
0.876 CHF
-
3 479Auf Lager
|
Mouser-Teilenr.
474-PRT-14275
|
SparkFun
|
Raspberry Pi Zubehör Raspberry Pi GPIO Male Header - 2x20
|
|
3 479Auf Lager
|
|
Min.: 1
Mult.: 1
|
Nein
|
|
|
|
GNSS / GPS Module A quadband receiver housed in a waterproof aluminum enclosure with unparalleled battery life and Galileo-HAS support.
- GPS-29524
- SparkFun
-
1:
1 238.89 CHF
-
3Auf Lager
-
Neues Produkt
|
Mouser-Teilenr.
474-GPS-29524
Neues Produkt
|
SparkFun
|
GNSS / GPS Module A quadband receiver housed in a waterproof aluminum enclosure with unparalleled battery life and Galileo-HAS support.
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC-Lüfter The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
- PRT-17368
- SparkFun
-
1:
5.67 CHF
-
8Auf Lager
|
Mouser-Teilenr.
474-PRT-17368
|
SparkFun
|
DC-Lüfter The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Robotik-Kits für Bildungszwecke This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
11.06 CHF
-
28Auf Lager
|
Mouser-Teilenr.
474-ROB-12629
|
SparkFun
|
Robotik-Kits für Bildungszwecke This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
28Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Bewegungs- & Positionssensoren für Plattenmontage This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09197
- SparkFun
-
1:
10.27 CHF
-
5Auf Lager
|
Mouser-Teilenr.
474-SEN-09197
|
SparkFun
|
Bewegungs- & Positionssensoren für Plattenmontage This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Luftqualitätssensoren Carbon Monoxide Sensor MQ-7
- SEN-09403
- SparkFun
-
1:
6.50 CHF
-
21Auf Lager
|
Mouser-Teilenr.
474-SEN-09403
|
SparkFun
|
Luftqualitätssensoren Carbon Monoxide Sensor MQ-7
|
|
21Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schraubenzieher und Steckschlüssel There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
- TOL-10865
- SparkFun
-
1:
13.40 CHF
-
10Auf Lager
|
Mouser-Teilenr.
474-TOL-10865
|
SparkFun
|
Schraubenzieher und Steckschlüssel There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
|
|
10Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Zubehör Raspberry Pi GPIO Ribbon Cable 40pin6
- CAB-13028
- SparkFun
-
1:
3.17 CHF
-
160Auf Lager
|
Mouser-Teilenr.
474-CAB-13028
|
SparkFun
|
Raspberry Pi Zubehör Raspberry Pi GPIO Ribbon Cable 40pin6
|
|
160Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Bluetooth Development Tools – 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger
- DEV-21251
- SparkFun
-
1:
44.84 CHF
-
1Auf Lager
|
Mouser-Teilenr.
474-DEV-21251
|
SparkFun
|
Bluetooth Development Tools – 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Zubehör This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
0.839 CHF
-
17Auf Lager
-
50erwartet ab 20.07.2026
|
Mouser-Teilenr.
474-PRT-13054
|
SparkFun
|
Raspberry Pi Zubehör This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
17Auf Lager
50erwartet ab 20.07.2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10127
- SparkFun
-
1:
3.18 CHF
-
27Auf Lager
|
Mouser-Teilenr.
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
27Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10128
- SparkFun
-
1:
3.18 CHF
-
158Auf Lager
|
Mouser-Teilenr.
474-SEN-10128
|
SparkFun
|
NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
158Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Kraftsensoren und Kraftaufnehmer This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
24.94 CHF
-
5Auf Lager
|
Mouser-Teilenr.
474-SEN-11207
|
SparkFun
|
Kraftsensoren und Kraftaufnehmer This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schraubenzieher und Steckschlüssel What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
- TOL-12891
- SparkFun
-
1:
4.36 CHF
-
9Auf Lager
|
Mouser-Teilenr.
474-TOL-12891
|
SparkFun
|
Schraubenzieher und Steckschlüssel What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
|
|
9Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Tastaturen Multimedia Wireless Keyboard
- WIG-14271
- SparkFun
-
1:
25.77 CHF
-
5Auf Lager
|
Mouser-Teilenr.
474-WIG-14271
|
SparkFun
|
Tastaturen Multimedia Wireless Keyboard
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schnittstellen-Entwicklungstools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
- BOB-23589
- SparkFun
-
1:
1.81 CHF
-
16Auf Lager
|
Mouser-Teilenr.
474-BOB-23589
|
SparkFun
|
Schnittstellen-Entwicklungstools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
|
|
16Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|