TPS61160DRVT

Texas Instruments
595-TPS61160DRVT
TPS61160DRVT

Herst.:

Beschreibung:
Driver ICs LED-Beleuchtungstreiber White LED Driver A 5 95-TPS61160DRVR A 5 A 595-TPS61160DRVR

ECAD Model:
Den kostenlosen Library Loader herunterladen, um diese Datei für Ihr ECAD Tool zu konvertieren. Weitere Infos zu ECAD-Modell.

Auf Lager: 250

Lagerbestand:
250 sofort lieferbar
Lieferzeit ab Hersteller:
6 Wochen Geschätzte Produktionszeit des Werks für Mengen, die größer als angezeigt sind.
Minimum: 1   Vielfache: 1
Stückpreis:
-.-- CHF
Erw. Preis:
-.-- CHF
Vorauss. Zolltarif:
Gehäuse:
Ganzes Reel (Sie bestellen ein Vielfaches von 250)

Preis (CHF)

Menge Stückpreis
Erw. Preis
Gurtabschnitt / MouseReel™
1.29 CHF 1.29 CHF
0.94 CHF 9.40 CHF
0.859 CHF 21.48 CHF
0.759 CHF 75.90 CHF
Ganzes Reel (Sie bestellen ein Vielfaches von 250)
0.713 CHF 178.25 CHF
0.673 CHF 336.50 CHF
0.64 CHF 640.00 CHF
0.622 CHF 2 488.00 CHF
0.61 CHF 4 880.00 CHF
† Für die MouseReel™ wird Ihrem Warenkorb automatisch eine Gebühr von 7.00 CHF hinzugefügt. MouseReel™ Bestellungen sind weder stornierbar, noch können sie zurückgegeben werden.

Alternativverpackung

Herst. Teilenr.:
Verpackung:
Reel, Cut Tape, MouseReel
Verfügbarkeit:
Auf Lager
Preis:
1.09 CHF
Min:
1
Herst. Teilenr.:
Verpackung:
Reel, Cut Tape, MouseReel
Verfügbarkeit:
Auf Lager
Preis:
1.10 CHF
Min:
1

Ähnliches Produkt

Texas Instruments TPS61160DRVR
Texas Instruments
Driver ICs LED-Beleuchtungstreiber White LED Driver A 5 95-TPS61160DRVT A 5 A 595-TPS61160DRVT

Produktattribut Attributwert Attribut auswählen
Texas Instruments
Produktkategorie: Driver ICs LED-Beleuchtungstreiber
RoHS:  
1 Output
Boost
700 mA
WSON-6
18 V
2.7 V
600 kHz
26 V
TPS61160
- 40 C
+ 85 C
PWM Dimming, Open LED Protection
Reel
Cut Tape
MouseReel
Marke: Texas Instruments
Oberer Ausgangsstrom: 100 uA
Eingangsspannung: 2.7 V to 18 V
Unterer Ausgangsstrom: 100 uA
Feuchtigkeitsempfindlich: Yes
Montageart: SMD/SMT
Anzahl der Kanäle: 1 Channel
Art der Ausgabe: Current Mode
Pd - Verlustleistung: 1.54 W
Produkt-Typ: LED Lighting Drivers
Verpackung ab Werk: 250
Unterkategorie: Driver ICs
Versorgungsstrom - Max.: 1.8 mA
Typ: Inductive
Gewicht pro Stück: 9,700 mg
Produkte gefunden:
Um ähnliche Produkte anzuzeigen, wählen Sie mindestens ein Kontrollkästchen aus
Um ähnliche Produkte in dieser Kategorie anzuzeigen, wählen Sie mindestens ein Kontrollkästchen oben aus.
Ausgewählte Attribute: 0

Für diese Funktionalität ist die Aktivierung von JavaScript erforderlich.

CNHTS:
8542319090
CAHTS:
8542330000
USHTS:
8542390090
JPHTS:
8542330996
KRHTS:
8532331000
TARIC:
8542399000
MXHTS:
8542330299
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS61160/1 White LED Drivers

Texas Instruments TPS61160/1 White LED Drivers have an integrated 40V switch FET with boost converters that drive-in series LEDs. Running at 600kHz fixed frequency, the boost converters reduce output ripple and enhanced conversion efficiency. This feature allows the usage of small external components. Feedback voltage is regulated to 200mV, and the external sensor resistor RSET is set through the default white LED. The LED current, while in operation, can be controlled using the one-wire digital interface (EasyScale protocol) through the CTRL pin. Applied to the CTRL pin, a pulse width modulation (PWM) signal the duty cycle determines the feedback reference voltage. The Texas Instruments TPS61160/1 will not burst the LED current in either digital or PWM mode. Additionally, this means that no audible noises will be generated on the output capacitor. Integrated open LED protection that disables the device prevents the output voltage from exceeding the device's absolute maximum voltage ratings during open LED conditions, offering maximum protection.